Bokin Electro-Hydraulic Technology (Foshan) Co., Ltd. is one of the leading manufacturers and suppliers of rexroth type pilot-operated pressure relief valve dbw 5x solenoid unloading up to 350 bar in China. If you're going to wholesale bulk durable rexroth type pilot-operated pressure relief valve dbw 5x solenoid unloading up to 350 bar made in China, welcome to get pricelist from our factory. All customized products are with high quality and competitive price.
Product Parameters
▶ Sizes: NG10 / NG16 / NG25 / NG32
▶ Max Operating Pressure: 350 bar (Port P, X)
▶ Max Counter Pressure: 210 bar (DC) / 160 bar (AC) at Port Y, T
▶ Pressure Ratings: 50 / 100 / 200 / 315 / 350 bar
▶ Directional Valve: Spool valve (6E) / Seat valve (6SM)
▶ Solenoid: 24 V DC (G24) / 230 V AC 50/60 Hz (W230)
Features
▶ Directional spool valve version "6E" (per data sheet 23178) or directional seat valve version "6SM" (per data sheet 22058)
▶ Version "A" (normally closed): maintains pressure limiting on power failure; Version "B" (normally open): drops to circulation pressure on power failure
▶ 4 adjustment types for spring preload setting: rotary knob, bushing with hexagon & protective cap, lockable rotary knob with scale, rotary knob with scale
▶ 5 pressure ratings from 50 to 350 bar
▶ Optional switching shock damping (version S) with Ø1.2 mm nozzle (code R12) to suppress unloading pressure spikes
▶ High-power solenoid; explosion-protected version available on request
▶ Concealed manual override (N9) or exposed manual override (N) for emergency operation
▶ Mating connector per DIN EN 175301-803 (K4)
▶ NBR or FKM seal material options
Rexroth Type Pilot-Operated Pressure Relief Valve DBW 5X Solenoid Unloading Up to 350 bar
DBW 10 A1-5X/100-6EG24N9K4
DBW 10 A1-5X/200-6EG24N9K4
DBW 10 A1-5X/315-6EG24N9K4
DBW 10 A1-5X/350-6EG24N9K4
DBW 10 A2-5X/100-6EG24N9K4
DBW 10 A2-5X/200-6EG24N9K4
DBW 10 A2-5X/315-6EG24N9K4
DBW 10 A2-5X/350-6EG24N9K4
DBW 10 B1-5X/100-6EG24N9K4
DBW 10 B1-5X/200-6EG24N9K4
DBW 10 B1-5X/315-6EG24N9K4
DBW 10 B1-5X/350-6EG24N9K4
DBW 10 B2-5X/100-6EG24N9K4
DBW 10 B2-5X/200-6EG24N9K4
DBW 10 B2-5X/315-6EG24N9K4
DBW 10 B2-5X/350-6EG24N9K4
DBW 20 A1-5X/100-6EG24N9K4
DBW 20 A1-5X/200-6EG24N9K4
DBW 20 A1-5X/315-6EG24N9K4
DBW 20 A1-5X/350-6EG24N9K4
DBW 20 A2-5X/100-6EG24N9K4
DBW 20 A2-5X/200-6EG24N9K4
DBW 20 A2-5X/315-6EG24N9K4
DBW 20 A2-5X/350-6EG24N9K4
DBW 20 B1-5X/100-6EG24N9K4
DBW 20 B1-5X/200-6EG24N9K4
DBW 20 B1-5X/315-6EG24N9K4
DBW 20 B1-5X/350-6EG24N9K4
DBW 20 B2-5X/100-6EG24N9K4
DBW 20 B2-5X/200-6EG24N9K4
DBW 20 B2-5X/315-6EG24N9K4
DBW 20 B2-5X/350-6EG24N9K4
DBW 30 A1-5X/100-6EG24N9K4
DBW 30 A1-5X/200-6EG24N9K4
DBW 30 A1-5X/315-6EG24N9K4
DBW 30 A1-5X/350-6EG24N9K4
DBW 30 A2-5X/100-6EG24N9K4
DBW 30 A2-5X/200-6EG24N9K4
DBW 30 A2-5X/315-6EG24N9K4
DBW 30 A2-5X/350-6EG24N9K4
DBW 30 B1-5X/100-6EG24N9K4
DBW 30 B1-5X/200-6EG24N9K4
DBW 30 B1-5X/315-6EG24N9K4
DBW 30 B1-5X/350-6EG24N9K4
DBW 30 B2-5X/100-6EG24N9K4
DBW 30 B2-5X/200-6EG24N9K4
DBW 30 B2-5X/315-6EG24N9K4
DBW 30 B2-5X/350-6EG24N9K4
Technical Specifications
| Size | NG10 | NG16 | NG25 | NG32 |
|---|---|---|---|---|
| Max Flow – Subplate (L/min) | 250 | - | 500 | 650 |
| Max Flow – Threaded (L/min) | 250 | 500 | 500 | 650 |
| Weight – Subplate (kg) | 4.05 | - | 4.95 | 5.85 |
| Weight – Threaded (kg) | 6.75 | 6.65 | 6.55 | 6.25 |
| Port P, X Max Pressure (bar) | 350 | 350 | 350 | 350 |
| Port T Max Pressure (bar) | 315 | 315 | 315 | 315 |
| Counter Pressure Y,T – DC Solenoid (bar) | 210 | 210 | 210 | 210 |
| Counter Pressure Y,T – AC Solenoid (bar) | 160 | 160 | 160 | 160 |
| Ambient Temp NBR/FKM (°C) | –30 to +50 / –15 to +50 | |||
| Viscosity Range (mm²/s) | 10–800 | |||
| Cleanliness (ISO 4406) | 20/18/15 | |||
Product Advantages
-
1. Solenoid Unloading Eliminates Manual Intervention in Automated Hydraulic Systems
The Rexroth DBW 5X mounts a directional valve (16) directly on the DB pilot housing. When energized, the solenoid shifts the directional valve to unload the main spool (3) - system pressure drops to the minimum circulation pressure instantly, without any manual valve adjustment. This is critical for injection molding machines that cycle between high-pressure holding phases and low-pressure idle phases, or presses that need to release hydraulic energy before tool change. The unloading command can be issued from a PLC, reducing operator involvement and shortening cycle time.
-
2. Fail-Safe Version Selection Matches System Safety PhilosophyRexroth DBW 5X offers two directional valve configurations with distinct safety behaviors. Version "A" (normally closed) keeps the pressure-limiting function active on power failure or cable break - the system stays protected even when electrical control is lost. Version "B" (normally open) automatically drops to circulation pressure on power loss, preventing sustained high pressure in emergency shutdown scenarios. Choosing between A and B depends on whether the system design philosophy prioritizes maintained protection or rapid depressurization as the fail-safe state.
-
3. Switching Shock Damping Protects Downstream Components During Unloading TransitionsWhen a Rexroth DBW valve unloads from 350 bar to circulation pressure, the rapid pressure drop can generate severe decompression shocks that damage piping, fittings, and downstream components. The optional switching shock damping plate (17) - installed between the pilot valve (2) and directional valve (16) - delays the B2→B1 passage opening through a calibrated nozzle (18). The Ø1.2 mm nozzle (code R12) provides optimal damping, reducing peak transient forces by absorbing the decompression energy and extending service life of the entire hydraulic circuit.
-
4. Dual Directional Valve Technologies Address Contamination and Leakage Trade-offsRexroth DBW 5X offers two directional valve technologies: the spool valve version "6E" (per data sheet 23178) and the seat valve version "6SM" (per data sheet 22058). The spool valve tolerates moderate fluid contamination and provides broader flow capacity through the unloading path. The seat valve offers near-zero leakage in the closed position, making it the better choice for applications where even small pressure bleed-down during the holding phase is unacceptable - such as precision hydraulic clamping circuits or long-stroke press holding systems. Select 6E for general industrial use with standard filtration; select 6SM when leakage minimization is a design priority.
Our Advantage
CORE TECHNOLOGY
20+ years R&D experience, industry expert-led, independent IP rights
CORE IP PRODUCT
4WREE, 4WRKE, 4WRJE, 4WRLE, 4WRPEH, etc
OUTPUT
Proportional valve monthly output >10000+ pieces
BRAND
100% independent proportional valve brand, supporting brand customization
CUSTOMIZED ELECTRO-HYDRAULIC SYSTEM SOLUTIONS FOR ALL APPLICATIONS
Integrating core component development, system design and customized Implementation Services
APPLICATION FIELDS
• Precision Injection Molding
• Die Casting
• Metallurgy & Foundry
• New Energy
FAQ
Q1: What is the lead time for Rexroth DBW 5X solenoid-unloading relief valves?
Common NG10 and NG25 DBW configurations with G24 solenoid and NBR seals are frequently stocked. For specific AC voltage, FKM seal, or seat valve (6SM) configurations, production lead time is typically 15–30 days.
Q2: Can I customize the solenoid voltage or seal material on a Rexroth DBW 5X order?
Two solenoid voltages (24 V DC G24, 230 V AC W230) and two seal options (NBR, FKM) are standard within the ordering code. Explosion-protected solenoid versions are available on request - contact us for lead time and pricing.
Q3: Are samples available before placing a bulk Rexroth DBW 5X order?
Samples of standard Rexroth DBW configurations can be provided prior to formal orders, subject to order quantity. This allows you to verify unloading behavior and solenoid response in your actual system before committing to volume.
Q4: When should I choose version A (normally closed) vs version B (normally open) on a Rexroth DBW 5X?
Version A (normally closed) keeps pressure limiting active when power fails - choose it when system protection must continue even during electrical faults. Version B (normally open) drops to circulation pressure on power loss - choose it when the design requires rapid depressurization as the fail-safe state, such as presses where sustained high pressure after an emergency stop would be hazardous.
Q5: What is the difference between directional spool valve (6E) and directional seat valve (6SM) on Rexroth DBW?
The 6E spool valve (data sheet 23178) tolerates moderate contamination and offers broader unloading flow capacity - suitable for general industrial applications. The 6SM seat valve (data sheet 22058) provides near-zero leakage in the closed position, preventing pressure bleed-down during holding phases - choose 6SM for precision clamping or long-stroke press applications where any leakage during the energized state is unacceptable.
Hot Tags: rexroth type pilot-operated pressure relief valve dbw 5x solenoid unloading up to 350 bar, China rexroth type pilot-operated pressure relief valve dbw 5x solenoid unloading up to 350 bar manufacturers