Custom-engineered for integrated hydraulic control in industrial machinery, our manifolds deliver stable, reliable performance built to your exact requirements.
Key Features
▶ Fully customizable design aligned with customer specifications
▶ Integrated assembly with proportional directional valves, directional valves, cartridge valves and sandwich valves
▶ Streamlined piping layout reduces leakage risk and installation complexity
▶ Enables precise motion control for consistent machine operation
▶ 100% pre-tested and delivered ready for out-of-box installation
Main Applications
Injection molding machines, die casting machines, blow molding machines, press brakes, hydraulic presses, vulcanizing machines, aluminum extrusion machines, and other industrial hydraulic equipment.
Standard Manifold Series
▶ Mold Clamping Valve Manifold
▶ Injection Valve Manifold
▶ Ejector Valve Manifold
Brand Compatibility
We integrate valves from industry-leading brands including Rexroth, HydraForce, Le-Hydraulix and Bokin, with brand selection fully customizable to project requirements.
Hydraulic Valve Manifolds
Main Components (for Hydraulic Systems & Valve Manifolds)
| Name | Model Series | Main Brands |
|---|---|---|
| Proportional Directional Valve | 4WRA、4WREE、4WRPEH、4WRKE、4WRTE、4WRLE |
|
| Directional Valve | 4WE、4WEH | |
| Pressure Relief Valve | DBETX、DBW、DBDS、DR | |
| Sandwich Valve | ZDR、ZDB、Z2S、Z2FS |
Installation Steps for Hydraulic Valve Manifold
Preparing the Installation Site
Begin by ensuring the installation area is clean, dry, and free of obstructions. Remove any protective covers from the manifold and verify that all ports, valves, and seals are intact according to the packing list. Check the machine mounting surface for flatness and cleanliness.
Mount the Valve Manifold
Position the manifold against the machine mounting surface using appropriate lifting equipment if needed. Align the ports with the connected hydraulic lines and cylinders according to the hydraulic schematic. Secure the manifold with bolts and washers, tightening to the recommended torque to avoid distortion or leakage.
Connect the Hydraulic Lines
Attach the pressure, return, drain, and working lines to the corresponding ports. Ensure all fittings and pipes are thoroughly cleaned before installation to prevent contamination. Connect the electrical wiring to solenoid coils according to the wiring diagram, then tighten all hydraulic fittings to the specified torque.
Test the Installed Manifold
Fill the system with clean hydraulic fluid and bleed air from the lines and manifold. Start the pump and apply pressure gradually while checking all connections for leaks. Verify that each valve function operates correctly according to the control sequence, and monitor system pressure, temperature, and noise during the initial run.
Bokin Electro-Hydraulic Technology (Foshan) Co., Ltd. is one of the most experienced hydraulic valve manifold manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy bulk advanced hydraulic valve manifold in stock here from our factory. Contact us for pricelist and customized service.
