Product Features
▶ Compact structure, stable pressure, energy-efficient operation, easy maintenance
▶ High pressure and large flow capacity, servo control, intelligent linkage, adaptable to extreme working conditions
▶ High precision, fast response, closed-loop control, digital regulation
▶ Dual-cylinder and multi-cylinder synchronization
Brand Compatibility
We integrate valves from industry-leading brands including Rexroth, HydraForce, Le-Hydraulix and Bokin, with brand selection fully customizable to project requirements.



Main Components (for Hydraulic Systems & Valve Manifolds)
| Name | Model Series | Main Brands |
|---|---|---|
| Proportional Directional Valve | 4WRA、4WREE、4WRPEH、4WRKE、4WRTE、4WRLE |
|
| Directional Valve | 4WE、4WEH | |
| Pressure Relief Valve | DBETX、DBW、DBDS、DR | |
| Sandwich Valve | ZDR、ZDB、Z2S、Z2FS |
System Types & Applications
| Category | System Name | Applications |
|---|---|---|
| Proportional Hydraulic System | Standard Proportional System | Construction Machinery, Special Equipment, New Energy Equipment, Metallurgical/Environmental Protection Equipment |
| High Precision Proportional System | ||
| High Precision Proportional Closed-Loop System | ||
| Servo Hydraulic System | Pressure Control Servo System | |
| Position Control Servo System |
Installation Steps for Hydraulic System
Preparing the Installation Site
Begin by inspecting the installation site. Ensure the area is clean, level, and capable of supporting the total weight of the hydraulic system, including the reservoir, pump unit, and connected piping. Verify that sufficient space is available for routine maintenance, oil filling, and heat dissipation.
Positioning and Securing the System
Move the hydraulic system into place using appropriate lifting equipment such as a forklift or overhead crane. Align the unit with the foundation bolts and secure it firmly. Check that the system is level to prevent uneven loading and ensure proper oil return to the reservoir.

Connecting Hydraulic Lines and Electrical Supply
Connect the pressure, return, and drain lines to the designated ports. Ensure all pipes and fittings are thoroughly cleaned before installation to prevent contamination of the hydraulic fluid. Then connect the main power supply, control signals, sensors, and grounding conductors according to the electrical schematic.
Filling, Bleeding and Testing
Fill the reservoir with clean, filtered hydraulic fluid of the recommended grade. Run the pump briefly to bleed air from the system, opening bleed points on cylinders and high points in the piping as needed. Start the pump in jog mode to verify correct motor rotation, gradually increase system pressure, inspect all connections for leaks, and calibrate the proportional or servo control parameters to match the application requirements.
Bokin Electro-Hydraulic Technology (Foshan) Co., Ltd. is one of the most experienced hydraulic system manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy bulk advanced hydraulic system in stock here from our factory. Contact us for pricelist and customized service.




